Are used for manufacturing of industrial rubber goods that are used for sealing the fixed connections, preventing the friction between the metal surfaces, for singular shock loads perception and also used as gaskets, decking and other non-sealing products.
All the plates are non-formed (produced by the method of autoclave vulcanization and at the continious vulcanizer).
2Н-I-ТМКЩ-С-3 ГОСТ 7338-90
Rubber sheeting N — non-formed of class 2 , type I, HFAA mark, hardness M, thickness of 3 mm.
2Н-II-ТМКЩ-С1-2х6 ГОСТ 7338-90
Rubber sheeting N — non-formed of the 2 class, type II, HFAA mark, hardness M1, with 2 fabric gaskets, depth of 6 mm.
2Н-I-МБС-С-4/Т-III-2-80 ГОСТ 7338-90
Rubber sheeting of class 2, N - non-formed, type I, OR mark, hardness M, thickness of 4 mm, group III of products in tropical execution by GOST 15152, location category 2, operating temperature range from minus 30°C to 80°C.
HFAA - heat-frost-acid-alcali-resistant
AOR - air oil-resistant (restricted ozone-resistant)
OGR - oil and gasoline resistant
Types of sheeting:
-
rubber sheeting (HFAA, AOR, OGR marks)
-
rubber and fabric sheeting (with one or several fabric layers) – only HFAA-M, HFAA-M1 marks
Sheetings of the following hardness shores are produces:
-
soft (S)
-
medium (M)
-
hard (H)
Operating conditions of sheetings and products made of them:
Mark |
TYPE |
Hardness |
Temperature range, °С |
Operating environment: |
|
Heat-Frost-Acid-Acali-Resistant sheeting |
I |
S |
From minus 45 to plus 80 |
Indoor air, reservoirs air, containers air; nitrogen, inert gas at the pressure from 0.05 to 0.4 MPa or fresh water, sea water, process water, drain water without organic solvents and lubricants; saline solutions with concentration before the saturation point; acids, alcalines with concentration before 20% at the pressure from 0.05 to 10.0 MPa |
|
I |
M |
From minus 30 to plus 80 |
|||
II |
M |
From minus 30 to plus 80 |
|||
I |
M1 |
From minus 45 to plus 80 |
|||
II |
M1 |
From minus 45 to plus 80 |
|||
Air and Oil Resistant sheeting |
I |
S |
From minus 30 to plus 80 |
Atmosphere air, indoor air, air of reservoirs, containers: nitrogen, inert gas at the pressure from 0.05 to 0.4 MPa or petroleum base oil at the pressure from 0.05 to 10.0 MPa. |
|
S1 |
From minus 40 to plus 80 |
||||
M |
From minus 30 to plus 80 |
||||
M1 |
From minus 40 to plus 80 |
||||
Oil and Gasoline Resistant sheeting |
I |
S |
From minus 30 to plus 80 |
Indoor air, air of reservoirs, air of containers; inert gas at the pressure from 0.05 to 0.4 MPa or oil and petroleum base fuel, gasoline at the pressure from 0.05 to 10.0 MPa; nitrogen |
|
S1 |
From minus 40 to plus 80 |
||||
M |
From minus 30 to plus 80 |
||||
M1 |
From minus 40 to plus 80 |
Size of sheetings:
Mark of sheeting |
Type |
Thickness, mm |
Width, mm |
Length, mm |
|
Heat-Frost-Acid Acali-Resistant sheeting |
I |
1,0 – 3,0 |
800 – 1000 |
up to 10000 |
|
II |
2,0 – 3,0 |
800 – 1000 |
up to 10000 |
||
I |
3,0 – 40,0 |
700 – 800 |
1800 – 2000 |
||
II |
3,0 – 10,0 |
700 – 800 |
1800 – 2000 |
||
Atmosphere and Oil Resistant sheetings, Oil and Gasoline Resistant sheetings |
I |
1,0 – 3,0 |
800 – 1000 |
up to 10000 |
|
I |
3,0 – 40,0 |
700 – 800 |
1800 – 2000 |
Rubber sheeting for sealing gaskets of vacuum systems Technical Requirements 38 105116-81
Purpose: The sheeting is used for fixed connections of vacuum system. The example of explanation: Operating medium: II-3х51-2062 Technical Requirements 38 105 116-81 Sheeting of type II (rolled), thickness of 3 mm, made of rubber of 51-2062 type. air Operating temperature: from minus 8° С to 70°С; The short time use of sealing gaskets made of the sheeting is allowed at the temperature from minus 30° С to 90° С
Size of sheeting::
Thickness, mm |
Width, mm |
Length, mm |
|
1,0 – 1,5; 2,0 |
1000 |
1800 - 40000 |
|
3,0 – 30,0 |
700 - 800 |
Rubber sheeting for electrical devices Technical Requirements 38 30596-95
Purpose: Used as sealants of fixed connections of electrical devices. The example of explanation: Operating medium: Sheeting 4 Technical Requirements 38 30596-95 Sheeting of 4 mm thickness. Sheeting T4 Technical Requirements 38 30596-95 Sheeting of 4 mm thickness in tropical execution. air and transformer oil Operating temperature: from minus 55°С to 50°С from minus 55°С to 100°С
Size of sheeting::
Thickness, mm |
Width, mm |
Length, mm |
|
3,0; 4,0 |
800 – 1000 |
до 10000 |
|
4,0; 5,0; 6,0; 8,0; 10,0; 12,0; 16,0; |
700 - 800 |
1800 - 40000 |
Average lifetime: Warranty life: 10 years 3 years
Rubber sheeting for articles in contact with foodstuff GOST 17133-83
Purpose: Sheets are used for production of sealants of fixed connections and other articles in contact with foodstuff. Explanation example: Operating environment: 2543141105 GOST 17133-83 rolled sheeting of medium hardness with operating temperature from minus 30°С to 70°С thickness of 5 mm. milk, cream, dairy products, meat, fish Operating temperature: from minus 30°С to 70°С
Size of sheeting:
Thickness, mm |
Width, mm |
Length, mm |
|
3,0-25,0 |
600-1200 |
1800-40000 |